Convertables

 Trying my best to balance crafting with sewing machine repair, crafting has won these past weeks because of Christmas. Back in the early fall, I decided I could knit each grandkid a pair of slippers. Knowing I could have up to eleven pairs to knit, you would think I would have started right away but that's not how this project launched. It wasn't until mid-November that I got serious and even then had several false starts. At first I wanted to make slippers that looked like animals but only one pair was made, green frogs, when I decided I really wanted to make a bootie type of slipper. I also wanted to add a leather sole but with the a non-slip feature so I used the backside of leather since it is a bit rough. At the last minute I got a request to add a name to an apron for a friends granddaughter and it was so easy on the Singer Futura XL-400 I decided to make a bag for each pair of slippers with the intended child's name embroidered on the bag:

Bags matched up with slippers (pink slippers in the middle are for a 14 month old so no bag)

Instant gift wrap! Not exactly instant but with just hooping the fabric, typing in their name on a laptop connected with the embroidery machine, it was only 10 minutes of stitching. I lined each bag, added buttonholes for the drawstring, and they were done. Here's a closeup of three of the bags to the oldest girls:

Bags that can hold something else after Christmas

I'll do this again since it was fairly easy and gives a bit of a thrill to have a bag with your name on it. I continue to find ways to use the embroidery machines and find I'm happily embroidering on that Singer Futura XL400!

As I continue to work on selling sewing machines, I finally bought a unit that will convert a motor using European 220V to our US 110. Over a year ago, at the last in-person River Rats TOGA, I bought a Husqvarna CB-N, one of the many sewing machines from Cindy Peter's estate. It's a handsome model in an interesting base.

Husqvarna CB-N

Take a look a how the knee lever engages the motor:

As the knee lever is inserted into the machine, it engages the lever you see above on the floor of the wood base. As you push the lever with your knee it in turn connects with the lever you see circled  in the above photo. Here is a closeup of that area:

The wire on the right side feeds up to a switch box that causes the motor to engage and run:

Small wire comes up from the base to connect to a switch

With a system like this I didn't want to take the original motor off and just add a modern motor. In comes a step up/step down transformer. On one side we chose the intended target voltage

Moveable pin circled in yellow, set for 110V

With the European plug that came with the Husqvarna CB-N

It was plugged into the opposite side of the transformer:

into output 220V. This all seems backwards to me but my husband and I read over the instructions several times and recalled our electrician son-in-law explaining the process as backwards. The transformer was plugged into a power strip with surge protection, recommended, the unit was turned on, and the light didn't even turn on. What happened? I inserted the knee lever and with a fair amount of push it engaged the motor and she ran! As it turns out, the light bulb is broken so I'm going to take it to a battery and bulb supply shop and see if they have 220V bulbs of this size. 

I did some practice sewing and it works just fine. The presser foot is really high up from the base of the machine but it does come right down on the feed dogs. It should take a whole lot of layers of fabric but I've only tried it with a size 16 needle and four layers of medium weight upholstery. It would sew but wasn't very happy so I'm going to try other samples and needles to test out its strength. It uses standard needles and low shank feet plus a free manual in English was found. Now I can see what was included with the original machine and I can search in my stash of presser feet for the right ones.

Why did this take so long for me to get this sewing machine up and running? The voltage transformer box just scared me! Did I need a step up or a step down transformer? What about watts? Can I just use a simple plug converter? This is where being a librarian comes into play: I love to research so I read up on why I would need a transformer unit and not just a plug end, what size I needed, and if I needed step up or down. Because I'm not an electrician, I consulted with the family expert first so I would be safe and not burn the motor out. It seems to be overkill but better safe than sorry. I will sell this machine with the transformer and it can easily sit on the floor next to the power strip so you do not have to make room for it on the table top with the sewing machine. It was a worthwhile adventure and I'm hoping there is someone in the Twin Cities who would like this somewhat different sewing machine. Let's hope so/sew!

A Prize Inside

 Remember the boxes of Cracker Jacks, a peanut and caramel corn mix in a box "with a prize inside"? Despite the trivial nature of the prize, I always got sucked into their advertising in the hope of finding something special. Nowadays I prefer a better quality caramel corn than Cracker Jacks but I continue to be thrilled when there is some kind of a hidden prize. Today I have to share with you a New Home sewing machine with a hidden prize inside.

The New Home Travel Mate was up for auction but didn't come with a foot control. Sometimes that is no problem, just an added expense, but if the parts are unique you can get into trouble. If you can't find it you end up with a real boat anchor! I stuck my neck out and hoped I could get one but while checking out parts I was skeptical the right one was being advertised to fit this model. But I got the bid, picked it up, and dashed home:

What's inside? How does this come off?

I couldn't figure out how to get the plexiglass cover off! It sorta pries off with small slots in the front and back. It needed a bit of cleaning but first I wanted to see what all was in the storage compartment in front. It had a nice set of snap on presser feet and extra needles, always welcome, but when you take the compartment off so you can sew free arm, there was a surprise:

Storage compartment pulls off to reveal more storage

Oh, be still my beating heart: there was the foot control, all snug in the compartment!

Foot control hidden away (is this a secret?)

I pulled it out and checked the plug end to find it was very unique

Three pin plug foot control

I did suspect, since it was promoted as a portable travel sewing machine, it might have attachments or foot controls built into a sliding out drawer under the machine or somewhere else and this time I was right. How cool was that?

A sewing machine is nothing if it cannot sew but it does sew very nicely. On the front of the machine it boasts "Micro Computer" and it does sound and run like an electronic sewing machine. It has the typical variety of stitches and even a needle threader. All it is missing is a needle up/down feature but does have a speed control lever as a little extra feature. Zigzag stitches are given in three levels so no dial for incremental increase in width but I can live with that, too.

Selection of stitches, speed control, and what's under the top lid

It is a really nice portable sewing machine! My risk paid off this time but I know it could have easily gone the other way and I would have to buy that 3-pin foot control for $40. Still not a bad deal but one I now don't have to deal with. 

As the fall decorations are getting boxed up and we head into Christmas, I better get hustling here or we will not get anything ready beyond the outside lights. A Christmas newsletter needs to be written, presents are only about a third purchased, and here I am writing to you about my latest sewing machine. Yes, this is the land of the sewing machine obsessed but I know I'm in good company!

New Home Travel Mate CE2200